PRODUCTS
»
Cold Roll Form Sections
»
ZED,CEE,SIGMA PURLINS
»
Roofing Cladding
»
Decking Sheets
»
Guard Rails
»
Stud Track Furring
»
Building Interior Products
»
Collecting Electrodes
»
Palisade Fencing
»
AutoMobile Accessories
»
T-Grid false ceiling systems

» Stud Track Furring

Quite Easily Done False Ceiling System

QED False ceiling system from Metform Corporation is ready to use, pre-finished, grid system. It is developed to meet the demand for simple, easily assembled, economical suspended ceiling. It consists of three simple members which assemble into structurally secure rapid grid, withoutthe use of lever,pin.

Sturdy and easy to use, QED systems has fast and easy installation. All tees are identical. Just insert any tee end into slots provided into main runners and snap down for perfect alignment and positive locking with exposed system and steel frames will be visible underneath.

METHOD

  • Measure the length & breadth of the room
  • Decide the size of the title to be put
  • Mark the levels on all sides of the wall
  • Mark the position of the runners on the width
  • Fix up wall channels and level them correctly
  • Mark the existing ceiling for the position of hanger at every 4ft. distance
  • Suspend the runners by means of G.I. wire and level them
  • Lock up the runners of joints and place the tile on them
Quite Easily Done False Ceiling Systems
     
 
 
Metcraft Enggineering Corporation offers a world class range of Stud Channels, Track channels Furring Sections etc.
   
» CEILING SECTION
   
    

MATERIAL - GALVANIZED STEEL
TYPE
A
B
C
THICKNESS - 0.48 - 0.60 mm
CEILING SECTION - I
52
26
83
LENGTH - AS PER REQUIREMENT
CEILING SECTION - II
38
26
69

 
» FURRING SECTION
  
    

MATERIAL - GALVANIZED STEEL
TYPE
A
B
C
THICKNESS - 0.48 - 0.60 mm
FURRING SECTION - I
35
22
64
LENGTH - AS PER REQUIREMENT
FURRING SECTION - II
38
22
67

 
» CEILING SECTION (HEAVY DUTY)
   
    

MATERIAL - GALVANIZED STEEL
A
B
C
D
E
THICKNESS - 0.48 - 0.60 mms
40
35
37
17
21
LENGTH - AS PER REQUIREMENT

 
» INTERMEDIATE SECTION
  
    

TYPE
A
B
C
53C
53
50 /75
50 /75
78C
78
50 /75
50 /75
103C
103
50 /75
50 /75
128C
128
50 /75
50 /75
178C
178
50 /75
50 /75
208C
208
50 /75
50 /75

 
» INTERMEDIATE SECTION (HD)
  
    

MATERIAL - GALVANIZED STEEL
A
B
THICKNESS - 0.48 - 0.60 mm
40
17.8
LENGTH - AS PER REQUIREMENT
   

 
 
» PERIMETER CHANNEL
 
    

MATERIAL - GALVANIZED STEEL
TYPE
A
B
C
THICKNESS - 0.48 - 0.60 mm
PERIMETER CHANNEL I
25
30
20
LENGTH - AS PER REQUIREMENT
PERIMETER CHANNEL II
20
30
20

 
 
 
 
» ANGLE
   
    

TYPE
A
B
ANGLE - I
25
12
ANGLE - II
25
25
ANGLE - III
27
27

TOP
   
© 2006. All rights reserved by Thakkar Group.